Entrance doors Termo

Efficient thermal insulation and perfect look

70 mm

Sash width

up to 40 mm

Double glazing width

up to 116 mm

Sash height

2 year

Guarantee period

70 mm

Sash width

up to 40 mm

Double glazing width

up to 116 mm

Sash height

2 year

Guarantee period

Maximum energy efficiency

Advanced resistance to deformation

Warm sill and protection from wind

Smooth lines for a modern interior

Specific features of the system

The Vikonda Termo doors seamlessly combine the maximum indicators of statics, strength, protection against burglary, energy efficiency, and they are also best known for stylish look. Being equipped with high-quality fittings, such doors will become a reliable barrier to drafts, and they also protect the house from any attempts of unauthorized entry.

Reinforced structure

Improved reinforcing profile 3 mm in the lock zone. Square reinforcing profile 2 mm in the hinge zone and 1.5 mm in the frame and transom-bar.

Maximum energy efficiency

Profile with maximum energy-saving effect. Possibility of mounting a high (54 mm) warm sill with plastic inserts to protect from freezing and drafts. Rubber weather strip for maximum tight hold down along the perimeter.

Various filling options

Transparent triple-pane for conservation of heat and natural light, decorative glazing or non-transparent sandwich panel for maximum protection from prying eyes. Oblique and bent transom-bars for reinforcement of the structure and implementation of non-standard design ideas.

Maximum energy efficiency

Compared to a metal door structure, the Vikonda Termo metal-plastic doors conserve much more heat due to the special structure of the profile, strong hold down along the perimeter and the possibility of installation of a triple pane.

Leaf thickness 70 mm

The leaf with wide plastic profile effectively prevents heat transfer along the door perimeter

Insulated glass unit thickness - up to 40 mm

The possibility of installing energy-saving triple-panes enables increasing the door thermal insulation performance to maximum

Warm high sill - 54 mm

Installation of a heat insulated high sill minimizes heat loss in the lower part of the doorway reducing the risk of drafts and getting snow, dust or dirt into the room

Warm sill and protection from wind

https://vikonda.com/wp-content/uploads/2023/11/doorporog1440-540_-02.png

https://vikonda.com/wp-content/uploads/2023/11/banner-1-zamena-02.png

https://vikonda.com/wp-content/uploads/2023/11/doorporog1440-540__1.png

Protection from drafts

At the point of the frame and sill contact, the probability of wind is very high. To reduce heat loss in this area, the Vikonda Termo door can be equipped with additional components. They will increase the tightness and reduce the risk of drafts to minimum.

Protection from wind WindstopInstallation of this component prevents the penetration of cold air and significantly increases the performance of thermal insulation
Rubber sealing pad for the sill Rubber pad increases the tightness at the point of the leaf and sill contact reducing the risk of drafts

https://vikonda.com/wp-content/uploads/2023/11/kartochka_tovara_dveri_zashhita_ot_produvaniya_1_windstop_klassik_1440x540-px-1.png

https://vikonda.com/wp-content/uploads/2023/11/kartochka_tovara_dveri_zashhita_ot_produvaniya_2_2.-uplotnitel_klassik_1440x540-px-1.png

Increased security and functionality

It is very important that the entrance door effectively protects from burglary attempts, including forceful ones. It is possible to improve the Vikonda Termo doors reliability by equipping them with a lock with a multi-point locking system. Due to the move of massive steel locking rods out of the leaf, the leaf is securely fixed in the closed position; at that the hold down pressing is evenly distributed along the perimeter further increasing the tightness.

Advanced resistance to deformation

Improved reinforcing profile 3 mm in the lock zone.

Square reinforcing profile 2 mm in the hinge zone.

Square reinforcing profile 1.5 mm in the frame and transom-bar.

Reinforced welded joints for large structures

Structures options

The entrance doors based on Vikonda Termo profile system can be made in various options. The doors differ not only in size and configuration: depending on the place of installation and expectations of the customer, different schemes can be implemented for door opening.

https://vikonda.com/wp-content/uploads/2023/11/1440x540odna.png

https://vikonda.com/wp-content/uploads/2023/11/1440x540dvuh.png

https://vikonda.com/wp-content/uploads/2023/11/1440x540gluha2.png

https://vikonda.com/wp-content/uploads/2023/11/1440x540arka.png

Non-standard structures

Standard rectangular structures with horizontal transom bars are not the only option for the Vikonda Termo doors. Bent and oblique transom bars also do an excellent job of dividing the leaves or blind part of the door into separate sections and increasing resistance to deformation. In addition, doors with a bent or oblique transom bar look more attractive than standard ones. Standard rectangular structures with horizontal transom bars are not the only option for the Vikonda Termo doors. Bent and oblique transom bars also do an excellent job of dividing the leaves or blind part of the door into separate sections and increasing resistance to deformation. In addition, doors with a bent or oblique transom bar look more attractive than standard ones.

Oblique transom bar

Bent transom bar

Venetian bars

German component parts

The reliability and durability of doors is largely determined by their component parts. The better the fittings, the better it will cope with the load and the longer its service life will be. It is possible to ensure a smooth move of a heavy leaf only with sufficiently strong door hinges. The fittings designed for heavy doors of large size ensure stable opening and closing of the door, as well as strong hold down along the perimeter. The Vikonda Termo door structures are equipped with high-quality German fittings and hinges, so that the doors of even the largest size serve faultlessly for many years with intensive use, for example, in places with increased daily foot-traffic. At the same time, the cost of door maintenance is reduced due to the high-quality fittings, for which a minimum care is required.

petly2_montazhnaya-oblast-1_montazhnaya-oblast-1

Simonswerk reliable hinges

By default, each door is equipped with three German Simonswerk hinges designed for loads up to 120 kg and more than 300,000 opening and closing cycles. Optional installation of an additional fourth hinge is possible for better hold down.

Hoppe lever door handles

German lever door handles are characterized by a combination of impeccable appearance, perfect ergonomics and many years of impeccable service life.

Door locks from Winkhaus

German-made locks provide reliable locking of doors and resist burglary attempts efficiently.

Decorative glass

The standard filling of the door leaf is a sandwich panel, a transparent energy-efficient triple-pane or a combination thereof. But in addition to transparent glazing in the entrance door, there possible the installation of textured glass with less transparency, which looks more impressive.

A large catalog of decorative glass allows making an optimal decision, both in terms of functionality and appearance.

Photo gallery of facilities

+1 photo

Vikonda windows and doors company

“Vikonda windows and doors company” is a company that not only holds leading positions, but also sets the trends of the modern market for uPVC -windows and doors

Get advice from our expert

Have a free-of-charge consultation from craft professionals!

Phone number

Name

en-US

Vikonda Termo means efficient thermal insulation and impeccable appearance

The Vikonda Termo doors seamlessly combine the maximum indicators of statics, strength, protection against burglary, energy efficiency, and they are also best known for stylish look.

How to choose Vikonda Termo entrance door? Learn about their specific features:
• Maximum energy efficiency
– thermal insulation – 0.81 (m2 K )/W
– leaf thickness – 70 mm
– insulated glass unit thickness – up to 40 mm
– rubber weather strip for maximum tight hold down along the entire perimeter • Advanced resistance to deformation
Improved reinforcing profile 3 mm in the lock zone, square 2 mm in the hinge zone and 1.5 mm in the frame and transom bar.
• Leaf height up to 116 mm.
Reinforced welded joints for large structures
• Warm high sill
Innovative solution for door structures

You can order the Vikonda Termo doors in various options: single-leaf, rebated, with false leaf or arch. All components, such as hinges, handles and locks are from German manufacturers with an impeccable reputation. It is possible to use oblique and bent transom-bars for reinforcement of the structure and implementation of non-standard design ideas.

The price for the Vikonda Termo doors and a 2-year quarantee period are reasonably justified.